24Aug

Ford 1.5EcoBlue / TDCI Bosch MD1CS005 – Now Supported

Ford 1.5 EcoBlue / TDCI Bosch MD1CS005 Now Supported New Protocol for Ford Our team continues innovating with a new Ford-focused release. It unlocks the Bosch MD1CS005 ECUs, previously inaccessible via BENCH. Now, seamless normal reading and writing (NR) is available directly through OBD 🚀 Tailored for the European market, this ECU supports 1.5 EcoBlue / TDCI engines. Key Features: Type: Engine Control Unit (ECU) ⚙️ Readout: OBD NR 🔌 MCU: TC298 🖥️ Read time: 5min 30sec ⏱️ Write time: 6min 30sec ⏱️ Checksums correction ✅ Compatibility List FORD: 1.5 Ecoblue / 1.5 TDCI EU6 The vehicle list may expand over time. Featured Post August 24, 2025 Ford 1.5EcoBlue / TDCI Bosch MD1CS005 – Now Supported May 15, 2025 New Protocol for Renault and Dacia – Hitachi BEM54 March 7, 2025 Bosch MD1CP007 – Range Rover March 7, 2025 Continental & Siemens VGS2/3/4-NAG2 (7G-Tronic)

15May

New Protocol for Renault and Dacia – Hitachi BEM54

New Protocol for Renault and Dacia – Hitachi BEM54C New Protocol for Renault and Dacia Remaps UK, Kent’s leading mobile tuning specialists, is excited to introduce a new AutoTuner protocol for reading and writing Hitachi BEM54C ECUs in Renault and Dacia vehicles via OBD mode. Serving Maidstone and the South East, we bring cutting-edge tuning to your doorstep with 14+ years of expertise and full insurance. Key Details Component: Engine Control Unit (ECU) Access: OBD NR connection Microcontroller: R7F701xxx Read Time: 2 minutes 30 seconds Write Time: 2 minutes Features: Automatic checksum correction Requirement: ATPG050 cable to bypass Secure Gateway (SGW) Supported Vehicles Dacia: 1.6 SCE Renault: 1.6 SCENote: Compatibility may expand over time. Why Choose Remaps UK? This new protocol enhances our ECU remapping services, optimising performance and efficiency for Renault and Dacia owners. Our mobile service eliminates the need for workshop visits, and our trusted tuning files ensure reliable results. Book your remap today to experience smoother, more powerful driving! Featured Post May 15, 2025 New Protocol for Renault and Dacia – Hitachi BEM54 March 7, 2025 Bosch MD1CP007 – Range Rover March 7, 2025 Continental & Siemens VGS2/3/4-NAG2 (7G-Tronic) March 7, 2025 3.0TDI Bosch MD1CS014 ECU

07Mar

Bosch MD1CP007 – Range Rover

Bosch MD1CP007 – Range Rover New AutoTuner Protocol Available! We are excited to announce that it is now possible to read and write Bosch MD1CP007 ECUs in BENCH mode for Land Rover vehicles equipped with 3.0 D200/D250/D300/D350MHEV engines! These vehicles, already impressive with their power and hybrid technology, can now be even more powerful thanks to this new release. 🎉 ⚠️ However, please note that the latest vehicles equipped with these ECUs have a new Bosch protection system that is not yet supported. Stay tuned to discover our upcoming news! 🔥 Key Features of This Release Type: Engine Control Unit (ECU) ⚙️ Readout: BENCH NR 🪛 MCU: TC298 🖥️ Read time: 2min ⏱️ Write time: 1min ⏱️ Checksums correction ✅ Backup creation 💾 Brand/Engines Covered by This Release* Land Rover: 3.0 D200 MHEV / 3.0 D250 MHEV / 3.0 D300 MHEV / 3.0 D350 MHEV *The list of brand/engines may evolve over time. Featured Post March 7, 2025 Bosch MD1CP007 – Range Rover March 7, 2025 Continental & Siemens VGS2/3/4-NAG2 (7G-Tronic) March 7, 2025 3.0TDI Bosch MD1CS014 ECU

07Mar

Continental & Siemens VGS2/3/4-NAG2 (7G-Tronic)

Continental & Siemens VGS2/3/4-NAG2 (7G-Tronic) New AutoTuner Protocol Available! We are excited to announce the support for 7G-Tronic Mercedes transmission control units (TCUs) with AutoTuner! 🎉 These TCUs, specifically the Continental VGS4-NAG2 & Siemens VGS2/3-NAG2 models, can now be read and written in OBD mode. 🌟 Key Features Type: Transmission Control Unit (TCU) ⚙️ Readout: OBD VR 🔌 MCU: TC1767 🖥️ Write time: 4min 30sec ⏱️ Checksums correction ✅ Compatibility List* MERCEDES: 250 BlueTEC (2.1) / 300 (3.5i) / 300 BlueEFFICIENCY (3.5i) / 300d BlueTec (3.0) / 300h (2.1) / 320 (3.0T) / 320 CDI (3.0) / 350 (3.5i) / 350 BlueEFFICIENCY (3.5i) / 350 BlueTec (3.0) / 350 EU6 (3.0T) / 350d / 350e Hybrid (2.0) / 400 EU6 (3.0T) / 400 EU6 (3.5T) / 400 Hybrid (3.5i) / 450 EU6 (4.7T) / 600 (6.0i) / 63 AMG (5.5T) *The list may evolve over time. Featured Post March 7, 2025 Bosch MD1CP007 – Range Rover March 7, 2025 Continental & Siemens VGS2/3/4-NAG2 (7G-Tronic) March 7, 2025 3.0TDI Bosch MD1CS014 ECU

07Mar

3.0TDI Bosch MD1CS014 ECU

Detail Blog We can now tune the VW / Audi 3.0TDI engine fitted with the Bosch MD1CS014 ECU! New AutoTuner Protocol Available! We can now tune the following VW, Audi vehicles with the Bosch MD1CS014 and 3.0TDI engine setup. We are thrilled to share the exciting news that you can now read and write Bosch MD1CS014 Engine Control Units (ECUs) directly in OBD mode! 🚗✨ This release opens up new possibilities for optimizing the performance of Audi and Volkswagen vehicles fitted with 3.0L TDI engines, manufactured from July 2020 onwards. 💡 Note: The MD1CS014 ECUs equipped with a more recent bootloader cannot be reprogrammed. Example: 059 907 309 AG – H80. Stay tuned to discover our upcoming news! 🔥 Key Features Type: Engine Control Unit (ECU) ⚙️ Readout: OBD VR 🔌 MCU: TC299 🖥️ Write time with unlocking: 7min ⏱️ Write time once unlocked: 2min ⏱️ Checksums correction ✅ Back to stock function 🔄 Compatibility List* AUDI: 3.0 TDI EU6 / 45 TDI (3.0) / 50 TDI (3.0) VOLKSWAGEN: 3.0 TDI EU6 Featured Post March 7, 2025 Bosch MD1CP007 – Range Rover March 7, 2025 Continental & Siemens VGS2/3/4-NAG2 (7G-Tronic) March 7, 2025 3.0TDI Bosch MD1CS014 ECU

STAY IN THE KNOW

Tuning Updates and News

Ford 1.5EcoBlue / TDCI Bosch MD1CS005 – Now Supported

New Protocol for Renault and Dacia – Hitachi BEM54

Bosch MD1CP007 – Range Rover

Continental & Siemens VGS2/3/4-NAG2 (7G-Tronic)

3.0TDI Bosch MD1CS014 ECU

Quick Links

Our Services

Subscribe Our Newslater